We are currently looking for a skilled Electrical Control Panel & Switchgear Engineer to join our team. LS Engineering Services Ltd manufacture low and medium voltage motor control centres (MCCs) and distribution switchgear for the oil and gas, petrochemical, food and defence industries etc. in its facility in Rackheath, Norwich. We are expanding our business [...]
LS Engineering Services Ltd are pleased to acknowledge the support of New Anglia and their ''Growth Through Innovation Fund'', which is part funded by the ''European Regional Development Fund'' New Anglia were key in helping LSES secure funding for the purchase of two Megger Sverker 900 Relay and Substation Test Systems. The purchase of this [...]
Our workshop are busy preparing 3 x Laurence Scott Slendaur TM DOL starters for despatch back to our clients facility in Gloucestershire UK. These starters have undergone a full refurbishment including new Toshiba Corporation contactors, PBSI Group Ltd protection relays, Cooper Bussmann Inc main HV fuses and full component replacement and re-wire. LS Engineering Services Ltd specialise in retrofit and refurbishment solutions [...]
The Brent Alpha platform was the first offshore installation we visited just a few days after the company formed back in 2007. Since then our technicians have visited many offshore installations both on the UKCS and abroad. Our oil and gas electrical engineering experience is extensive and we look forward to continuing our support both [...]
The importance of routine maintenance is clear to see in this photograph. A stalled motor caused an overload fault which was not cleared by the respective protection device. Subsequent investigation attributed complete failure of the motor and associated MCC cubicle to a failed motor overload device thus causing severe overheating and subsequent fire. The clients [...]
Failed ABB Sace Megamax back in the workshop after being replaced with a retrofit solution in the form of an ABB Emax 2 We also undertake circuit breaker maintenance, repair & overhaul both onsite and within our workshop facility in Norwich.
The ongoing situation regarding coronavirus both in the UK and around the world will not have escaped your attention. Following the announcement yesterday asking people to stop non-essential contact and non-essential travel, I wanted to contact you regarding the steps being implemented here at LS Engineering Services Ltd, that we anticipate will allow us to [...]
LS Engineering Services are pleased to announce the successful completion of another ‘intelligent’ switchboard for the UK Defence sector. This 440VAC 2000A switchboard has been manufactured at our site in Norwich in conjunction with Proeon Systems Following stringent in-house testing the switchboard has now been installed and tested at our clients facility in the north [...]
LS Engineering Services Ltd have just completed upgrade modification work to a Laurence Scott Slendaur TM truck. The truck was received as a 550KW 3.3kV DOL motor starter with the customer requesting modification of the drive into a Feeder for a 1MVA 3.3kV Transformer. This workscope therefore involved the supply and installation of uprated cabling, [...]
LS Engineering Services Ltd are pleased to announce that work is now well underway on another large LV switchboard for the Defence Sector. This switchboard will again incorporate ABB’s ‘smart’ range of switchgear products including the ABB Emax and ABB Tmax circuit breakers. In order to give our client not only the best in switchgear design and manufacture [...]
