The importance of routine maintenance is clear to see in this photograph. A stalled motor caused an overload fault which was not cleared by the respective protection device. Subsequent investigation attributed complete failure of the motor and associated MCC cubicle to a failed motor overload device thus causing severe overheating and subsequent fire. The clients [...]
LS Engineering Services Ltd have recently undertaken work on the Apache Beryl Bravo platform as part of the installations Delta V control system upgrade. This work involved the installation of control components and associated wiring modifications to a large quantity of LV MCC and MV cubicles to enable the platform remote operation of various drives. [...]
LS Engineering Services Ltd have been working on a number of projects for Delta Fire , the most recent of which involved the procurement, installation, inspection and testing of a complete electrical system for a Heli Deck foam system container. The installation was required to be CompEX certified and therfore our Compex certified engineer was utilised. LS [...]
LS Engineering Services Ltd site support team recently completed the overhaul of 3 MV Gas Compressor Motors for a major Onshore Oil and Gas plant in Southern England. These activities included detailed inspections and remedial work including the replacement of worn labyrinth seals.
LS Engineering Services Ltd recently completed upgrade and maintenance work to two Laurence Scott & Electromotors Ltd Slendaur MV Motor starters for our client in Singapore. This work involved the replacement of two vacuum contactor's, fitting of replacement CT's and partial re-wire of the control circuit. The work was undertaken within the clients local workshop [...]
LS Engineering Services recently completed the overhaul of a number of 325VDC Ballast Pump Starter Cubicle. These starters arrived at our workshop facility in various states of repair, we have subsequently undertaken a full overhaul including repair and replacement of some parts and returned them to the client.
LS Engineering Services site support team recently completed the overhaul of 2 x 6.6kV Gas Compressor Motors for a major power & utility company in Bristol. Our initial scope of work was increased to include a partial stator re-wedge after our boroscope inspection found loose and missing wedges on one of the motors.
